E1 is the Pick and Place Machine with Memory

What is a material library is like a library for books, it is a library for packages. Due to the feedback from many customers, the parameters of the material need to be re-adjusted every time a different file is changed, including the height of the material taken, the height of the patch, the speed of the material, etc., which greatly wastes the mounting time. Therefore, the function of the material library came into being.

Figure 1

How to use the material library? When editing a new file, you need to enter the package information into the Library in advance. The more package information you store, the less time you will have to edit another new file. Why is editing time reduced? Because Library will store the information of each package, including Name, Length, Width, Thickness, Deviation, Nozzle Types, Alignment Method, the parameters of the camera, 3D, the pick speed, place speed, moving speed, pick delay, pick height, place delay, place height, holding height and etc. When you edit another file, for the edited package, you don't need to set it again, just change the position of the material station. In combination with the use of detachable material racks, you even only need to replace part of the material station. You can put the components that the two files need to use on one shelf, and put the rest of the components on the other shelf. When you need to change the file, you can replace the other spare shelf. Just change the placement of inconsistent components on the spare rack. The information on the same rack does not need to be edited repeatedly. This greatly saves the time of temporarily working with the machine for loading and the time of repeated loading.

What should Be Considered when Starting SMT Mounter Machine?

What Indicators Need to Be Tested Before the SMT Production?

What is the Assembly Process of Circuit Board?