SMT pick and place machine is a kind of intelligent precision equipment, which is not only large in size, but also difficult to operate. We do not recommend that you use the phone directly without a systematic study. Since many friends have various unexpected operations in the process of using the SMT pick and place machine, now we provide you with several common precautions for operating the SMT pick and place machine and the selection of the appropriate pick and place head for the SMT pick and place machine. .
1. Understand the command labels commonly used in SMT pick and place machine
There are many labels and instructions in the SMT pick and place machine that we need to understand and master, so that we can correctly input the information corresponding to the products we need to mount. If we are not familiar with these basic operations, it is quite dangerous to use the SMT pick and place machine. So learning the basic operation of the SMT pick and place machine is a must.
2. The SMT pick and place machine should do a good job of start-up detection
When we turn on and off the machine, we must do sufficient inspection work, such as whether the current voltage of the SMT pick and place machine is the standard voltage (foreign voltage 110V, China voltage 220V). If the voltage does not meet the standard, we need a transformer to change the voltage of the SMT pick and place machine and need to pay attention to the restart sequence.
3. Do a good job in the inspection of the SMT pick and place machine after the work
Since we often use SMT pick and place machines, there are many parts in it that are easily consumed, such as nozzles, lenses, lubricants, etc., which are important factors that easily lead to pick and place errors. After using the concentrator, we need to check these parts, replace them and wipe them.
1. Fixed single-head SMT pick and place machine
Generally speaking, we rarely use single-head SMT pick and place machine now. The single-head pick and place speed is slow. It cannot meet the needs of enterprises and consumes more power, so it is gradually eliminated by the world. There are also few single-head pick and place machines on the market. We can increase the number of pick and place heads according to demand, which can improve the efficiency of production.
2. Fixed multi-head SMT pick and place machine
The fixed multi-head SMT pick and place machine is an upgraded version of the single-head machine. It has three to eight or more heads for fast pick and place. Generally we call it a multi-head machine. But this type of machine is not smart enough. It has low cost and low precision. It can be used by companies that do not require high pick and place accuracy.
3. Rotary multi-head SMT pick and place machine
This type of pick and place head is often used in many SMT pick and place machines now, because it is more intelligent and fully automated, and has greatly improved accuracy and speed. Now many companies that produce circuit boards use this type of pick and place head for fully automatic high-speed production. It only takes about eight milliseconds to attach a component on average, which is highly praised by the majority of manufacturers.
English
日本語
한국어
français
Deutsch
Español
italiano
русский
português
العربية
tiếng việt
