What should Be Considered when Starting SMT Mounter Machine?

What needs to be considered when starting SMT mounter machine? Let us find out together.

1. We first turn on the SMT mounter machine power supply according to the safety technical operation specification of smt equipment;

2. We need to check whether the vacuum pressure of the SMT mounter machine meets the requirements of the equipment. The vacuum value of the placement machine is usually around 5.5bar.

3. Turn on the SMT mounter machine servo system.

4. Return the x and y axes of the SMT mounter machine to the initial position of the source point.

5. According to the width of the pcb circuit board, adjust the width of the guide rail of the SMT mounter machine transmission system. The width of the guide rail should be greater than the width of the PCB by 1mm to ensure that the PCB slides freely on the guide rail.

6. When starting the SMT mounter machine, set the PCB positioning device at the same time.

The above are the boot requirements of the SMT mounter machine, as well as the basic requirements, such as boot time. If you have any questions, please contact the manufacturer of the SMT mounter machine.

Trosntol is a manufacturer and supplier dedicated to the development and sales of SMT products. We are looking for suitable international partners. Our company believes that the prerequisite of cooperation is trust, and the results of cooperation are mutually beneficial. Whether you are a business or an individual, we realize our self-worth by creating value for our customers. Trosntol is a supplier worthy of long-term cooperation. Our company provides strong support for all agents. Welcome to join.

How to Improve the Efficiency of Pick and Place Machine

New innovation for stencil printer- Tronstol TP3040

Resolution and Accuracy of SMT Mounter Component Loader